HPS-480CC，MEMOLUB潤滑系統
更新時間：2017-07-07 點擊次數：2210次
HPS-480CC，MEMOLUB潤滑系統
比利時Memolub公司
適用行業:汽車、水泥、化工、礦山、鋼鐵、造紙、火電、石化、風電、食品、工業機器人、港口、水處理...
適用場合:自動化機械設備、風力發電、礦山輸送機...
MEMOLUB?
潤滑器是一種自主的單/多點機電潤滑器。 其高25度的潤滑劑噴射壓力開啟了常規系統不可能的新的廣泛應用。 Memolub HPS可以在遠離潤滑點8米處遠程使用。 遠程安裝避免危險或困難的接入點，維護人員可以安全地工作。 可以通過安裝Memolub HPS來避免潤滑機器停機（不可能進入，移動部件等）。 Memolub HPS也可以用作迷你中央潤滑系統。 結合漸進式分配器塊Memolub HPS多點潤滑是降低維護成本的一種簡單，經濟的方式。
由于其率，MEMOLUB?可以在工作溫度下泵送N.L.G.I等級2/3的油脂，基礎油粘度高達15000cSt。 這意味著即使在-15°C，MEMOLUB?仍可以吸收常規的EP2潤滑脂。
HPS-480CC，MEMOLUB潤滑系統
MEMOLUB一。
MEMOLUB ONE是常規微型潤滑的解決方案。
其240cc含量和0.60?7.20cc日產量成為我們產品系列的理想多功能潤滑器。
設置1到12個月。憑借其10巴的壓力，它可以遠程安裝在2米處 - 認證的ATEX - EX區域22
遠程安裝，可從潤滑點使用zui多兩米
新一代自動潤滑器。
其可靠性使其成為市場上性能zui高的潤滑器。
適用于小型軸承，電動機，輸送機，通風機和泵。
市場上的裝置。
*可更換的耗材是可回收的塑料充填和堿性電池。
*的可再填充，環境影響很小
HPS-480CC，MEMOLUB潤滑系統
| Accessories | References | Specifications |
|---|
| Elbow fitting G1/8 – Ø8mm | 2711 | Quick elbow fitting for 8mm pipe |
|---|
| Push in G1/8 – Ø8mm | 2724 | Quick fitting for 8mm pipe |
|---|
| Fitting M/F M5x80 – G1/8 | 2730 | Adapter for U-M 1/8 BSP |
|---|
| Fitting M/F M6x75 – G1/8 | 2731 | Adapter for U-M 1/8 BSP |
|---|
| Fitting M/F M6x100 – G1/8 | 2732 | Adapter for U-M 1/8 BSP |
|---|
| Fitting M/F M8x100 – G1/8 | 2733 | Adapter for U-M 1/8 BSP |
|---|
| Fitting M/F M8x125 – G1/8 | 2734 | Adapter for U-M 1/8 BSP |
|---|
| Fitting M/F M10x100 – G1/8 | 2735 | Adapter for U-M 1/8 BSP |
|---|
| Fitting M/F M10x125 – G1/8 | 2736 | Adapter for U-M 1/8 BSP |
|---|
| Fitting M/F M10x150 – G1/8 | 2737 | Adapter for U-M 1/8 BSP |
|---|
| Fitting M/F M12x125 – G1/8 | 2738 | Adapter for U-M 1/8 BSP |
|---|
| Fitting M/F M12x150 – G1/8 | 2739 | Adapter for U-M 1/8 BSP |
|---|
Transparent housing for refill
| Accessories | References | Specifications |
|---|
| Kit GIGA | 1203 | Transparent housing, locking ring, compression plate, spring, battery seal 480 cm3 |
|---|
| Kit Standard PA | 121204 | Transparent housing, locking ring, compression plate, spring, battery seal 120 cm3 |
|---|
| Kit MEGA PA12 | 1205 | Transparent housing, locking ring, compression plate, spring, battery seal 240 cm3 |
|---|
| Transparent housing PA12 Standard | 2208 | Transparent housing in polyamide for UV et aggressive environment 120 cm3 |
|---|
| Transparent housing PA12 MEGA | 2209 | Transparent housing in polyamide for UV et aggressive environment 240 cm3 |
|---|
Distributor kit
| Accessories | References | Specifications |
|---|
| Distributor kit 4S | 1505 | Installation kit for DB, distributor block, bracket & 2 push-in G1/8 per outlet |
|---|
| Distributor kit 6S | 1506 | Installation kit for DB, distributor block, bracket & 2 push-in G1/8 per outlet |
|---|
| Distributor kit 8S | 1507 | Installation kit for DB, distributor block, bracket & 2 push-in G1/8 per outlet |
|---|
Protection cover
| Accessories | References | Specifications |
|---|
| Protection Cover 120-240 cm3 | 2211 | Protection against water and dust 120 and 240 cm3 |
|---|
| Protection cover 480 cm3 | 2212 | Protection against water and dust 480 cm3 |
|---|
Brushes and kits
| Accessories | References | Specifications |
|---|
| Check valve | 2801 | For using with brush or into MEMO HPS |
|---|
| Brush 15mm + Adaptor | 2810 | Round brush, Animal fabrication |
|---|
| Brush 30mm + Adaptor | 2811 | Round brush, Animal fabrication |
|---|
| Brush 50x15mm + Adaptor | 2812 | Flat brush, Animal fabrication |
|---|
